In Stock

Originators for Embossed Holography

Blue Phoenix Series

A “6×6” photoresist matrix containing master-original embossed holograms and printed in several hours? Embossed holograms with deep 3D imagery, achromatic holograms with advanced security features? You really need our Originator.

Only our Originators can quickly and easily produce deep 3D holographic images and combine these images with state-of-the-art optical security features. Only our originator produces achromatic holograms viewable equally well in front or back illumination. Really quick optical recombination has now finally become possible. We have put more than 15 years of our R&D in direct-write and image-matrix holographic techniques into these originators, not to mention our expertise in pulsed lasers for holography.

Invited presentations about our Originators were given at the following conferences: The Holography, HSP Asia, HSP EMEA and SPIE conference Photonics West 2018 – download the article and PowerPoint presentation.

Originators developed jointly with Dr. Andrejs Bulanovs, Soltech Ltd.

Blue Phoenix Series

Geola’s Originators print master-original holograms for embossed holography applications – for the manufacture of either high security holograms or decorative holograms for brand protection. Geola’s uniquely designed pulsed laser technology drives most of our Originators. Holograms can be printed simultaneously on a standard originating area, thus obviating further mechanical hologram recombination. The state-of-the-art Originators Series currently consists of three machines types:
  • IMP-6 – Image-Matrix Printer – the working principle of those Originators is similar to Kinemax or Firefly, but the machine itself is easier to operate, is cost-effective and (we are sure) produces better holograms. Those originators employ either a CW or a pulsed laser. The pulsed laser option allows the printing of large format master-originals much quicker than with any other originator.
  • DIWO-6 – Direct Write Originators – the working principle is similar to that of our printers for poster-sized holograms. This originator uses a pulsed laser to rapidly record deep holographic 3D images, with an image depth of up to 75% of the hologram width, onto a photoresist plate. The CW laser also can be employed in this originator, but the printing process will happen much slower.
  • IMP-6-DW – this machine combines IMP and DIWO originators writing heads allowing the origination of master-holograms containing deep 3D holographic images and all modern optical security features.
Standard origination area for holograms is 150x150mm (6″x6″) and can be enlarged on demand. Positive photoresist plates are required for printing. Geola can supply positive photoresist plates 200x250mm or 200x300mm. For model specific Originators details please look at the corresponding tab.

Photographs of some effects produced with our Originators

Security features on this hologram are suitable for banknotes and ID windows. This hologram is possible to produce only with our Originators. Invited presentations about our  Originators were given at the conferences: Download our Originators Powerpoint presentation at HSP EMEA 2018

IMP-6

IMP-6 – Image-Matrix Printer

The Blue Phoenix IMP-6 Originators allow the origination of all commonly used types of security holograms and diffractive optical elements. The Originators have three operating modes – holographic, lithographic and combined mode with fully programmable switching between these modes during hologram origination.

The originating area of standard holograms is 150x150mm (6″x6″) and can be enlarged on demand. If IMP-6 originators are equipped with a pulsed laser, this area can be filled with identical or different holograms in only several hours, thus making mechanical recombination unnecessary.

Positive photoresist plates are used as the printing medium. Origination is accomplished by the exposition of a desired photoresist area, filling it with holographic micro-frames, each of which contains elementary holograms and subsequently developing the obtained diffractive structure in an etching solution.

Invited presentations about our  Originators were given at the conferences:

Download our Originators Powerpoint presentation at HSP EMEA 2018

Security hologram samples

Please visit IMP-6 security holograms and diffractive optical elements page for IMP-6 sample works.

Features

IM-6 sample hologram security features area - 1Atomic force microscope photographs of Nickel Shims originated with Originators IMP-6 and IMP-6-DW
Unique features Direct image projection on photoresist with resolution of up to 26,000dpi.
Use of custom bitmap images (up to 10 per hologram) for filling holographic or lithographic pixels. This option allows the realization of direct image projection at a resolution of 210,000dpi and allows the recording of various custom nanostructures, e.g, nanotext with letter height  ~5um and other nanostructures.
Graphical and security effects Lithographic effects
Diffractive microtext up to 20microns
Nanotext down to 5microns
Microimages
Nanoimages
Pearl effect
Letter lens
Lenses
Hidden images (CLR) static and animated
Holographic Diffractive elements Color motion and kinetic motion
True color 2D, True colour 2D/3D
True color stereograms with 2-49 parallax views
Multi-channel color holograms with 2-49 channels
Multilayer 2D/3D with unlimited number of layers, depth modulation
Embossed type holograms Any custom nanostructures – up to 10 in one elementary hologram (diffuse white area, 2D grating, axicon, Fresnel micro lenses and etc.).
Any images composed of common diffraction gratings (700 – 1400 lines/mm, orientation 0-180 degrees; color, angle, brightness and emboss modulation).
Any images composed of 2D diffraction gratings (700 – 1400 lines/mm, orientation 0-90 degrees; color, angle and brightness modulation).
Lithographic Diffractive elements Fresnel lens effect of any shape and image. 3 modes: lens mode, gradient mode, surface mode. In gradient mode, additional angle and frequency modulation features are available. Round and elliptical lens generation of various sizes and types.
Any images composed of Blazed grating (with asymmetric saw tooth grating profile). Gratings frequency range 1-500line/mm, orientation 0-360 degrees, angle and frequency modulation.
Any images composed of symmetric grating. Gratings frequency range 1-500line/mm, orientation 0-180 degrees, angle and frequency modulation.
Any images composed of 2D grating. Gratings frequency range 1-500 line/mm, orientation 0-90 degrees, angle and frequency modulation

HARDWARE

Resolution

  • Holographic micro-frame size – 225x126micrometers
  • Size of the Elementary hologram in micro-frame – from 1x1micrometers
  • Elementary holograms density – up to 26,000 elementary holographic pixels per inch)
  • Graphic resolution up to 210,000dpi

Originating area
200x200mm
(Bigger areas available on request)

Modulator type
LCOS 1920x1080pixels

Laser
High performance 405nm laser or Geola’s BlueBird series pulsed laser

Focussing
With CCD camera

SOFTWARE

Included programs

  • Layers creation programs (effects generation and calculation programs)
  • Visualizer
  • Hologram recording program.

The hologram is built by a combination of layers containing different visual effects. The number of layers is not limited. It is possible to have any combination of holographic and lithographic layers in the design of one hologram. Final and (any) intermediate results can be visualized by our software and verified during design work. The software for hologram layer creation is not interfaced with the software for hologram recording and can be installed on any number of computers for designers’ convenience.

In the case of availability of new Originator software, all upgrades will be free of charge for one year after installation.

In the case of new Originator’s software availability, all upgrades will be free of charge for one year after the installation.

OPERATION

Originating modes Holographic mode
Lithographic mode
Combined Holographic-Lithographic mode
Switch between holographic and lithographic operation modes is performed on the fly automatically in 0.5sec. with absolute positioning accuracy.
Originating speed ~ 1 sq.cm per 30 minutes with CW laser
~ 1 sq.cm per 7 minutes with pulsed 30Hz laser
~ 1 sq.cm per 3 minutes with pulsed 60Hz laser
Grating pitch Holographic mode: variable 700–1400lines/mm
Lithographic mode: variable 1–500lines/mm
Number of colors Rainbow colors:  430-680nm range with 1nm resolution
Mixed colors:  holographic white and magenta
Number of direction Holographic mode: 0-180degrees
Lithographic mode: 0-360degrees
With 1 degree design resolution and 0.1degree recording resolution
Focussing modes Whole area focusing
Local focusing
Autofocusing

ENVIRONMENT

  • Originator’s operating room size – not less than 2x2x2meters
  • Operating voltage – 230V
  • Power consumption < 100 W
  • Operating temperature – 21±2 degrees Celsius
  • Operating humidity – 50±10%
  • Exposed plates processing room – not less than 1Ă—1.5Ă—2 meters, with fume extraction.

DIWO-6

DIWO-6 – Direct Write Originators

The Blue Phoenix DIWO-6 Originatorsquickly and easily imprints deep 3D holographic images of live or virtual objects onto a photoresist surface. Those are the only Originators on the market employing pulse laser for photoresist exposure. As a result, they are the quickest Originators ever.

From all the commonly used security features those Originators produces only hidden images, but necessary optical security features can be overprinted by an IMP-6 or any other originator on top of the undeveloped photoresist plate exposed by the DIWO-6.

The machine produces master-original holograms on positive type photoresist plates. Origination is done by exposing a desired photoresist area, covering it with holographic micro-frames each of which contains elementary holograms and subsequently developing the obtained diffractive structure in an etching solution.

Invited presentations about our Originators were given at the following conferences: The Holography, HSP Asia, HSP EMEA and SPIE Photonics West 2018 – download the article and PowerPoint presentation.

Features

The only originators in the world quickly producing deep holographic 3D images on photoresist medium.

Unique features Direct Write of true colour deep 3D transmission holograms with pulsed laser
Direct Write of achromatic deep 3D holograms viewable in front and back illumination with pulsed laser
Holographic frames are the smallest on the market – only 100x100micrometers
Pulsed laser makes this Originator the quickest on the market
Originated hologram of 3D object contains from 200 to 800 its perspective views
Graphical and security effects True holographic 3D images
Minimal imprinted text size – 0.7mm
Hidden images (CLR) static and animated
Holographic Diffractive elements Color motion and kinetic motion
True color 2D, True colour 2D/3D
True color stereograms with 200-800 parallax views
Multilayer 2D/3D with unlimited number of layers

Hardware

Resolution

• Holographic micro-frame size – 100x100micrometers
• Each holographic micro-frame contains 200-800 2D image pixelsOriginating area
152x152mm (6″x6″)
(Bigger areas available on request)Originating speed
~ 1 sq.cm per 7 minutes with pulsed 30Hz laser
~ 1 sq.cm per 3 minutes with pulsed 60Hz laserModulator type
LCOS

Laser

Geola’s BlueBird series pulsed laser, 440nm, repetition rate – from 60Hz to 120HzFocussing
With CCD camera, autofocusing per four defining points

Software

Included programs

• Holoprocessor
• Visualizer
• Hologram recording program

Information for digital 3D hologram is obtained from digital pictures pixels. Our software from series parallax-relates images takes pixels with same coordinates and combines from them holographic micro-frames called also holopixels or hogels. Each of such micro-frames contains 200-800 2D pixels replaying into 200-800 viewing angles. The program to create holopixel images for whole hologram is independent from hologram recording program and can be installed on any number of computers for designers convenience. Hologram visualizing program creates hologram preview from series of parallax-related images and also can be installed on all designers computers.

Environment

Originator’s operating room size – not less than 3x2x2meters
Operating voltage – 230V
Power consumption < 500 W
Operating temperature – 21±2 degrees Celsius
Operating humidity – 50±10%
Exposed plates processing room – not less than 1×1.5×2 meters, with fume extraction.

Contact Us

If you have any questions related to this product – please feel free to contact us via contact form below.